level measurement

Using flexible extensions with bin level sensors

Using extensions on level sensors that are used to monitor high level conditions in bins and silos is not new.  Many applications exist where the shaft is extended up to 12' from the mounting point of the level sensor.  These situations are when the senbsor is mounted on the top of the vessel, not the side.  However, sometimes the length of the extension, the type of material and its flow characteristics are such that the side loading caused by material flow and movement can be damaging to the sensor.  In these situations a "flexible" cable extension is desired to be used.  We recommend these flexaible extensions for use with rotary paddle type bin level sensors up to several feet, however, we are aware of customers using longer lengths.  The real limit on the length has to do with actuation time due to the rotation of the sensor output shaft and the twisting of the cable.  Up to six or so feet will provide reliable actuation of the sensor.

Next time you need an extensions for your rotary paddle bin level sensor for high level control consider a flexible extension.  The length is even easily modified in the field.

Joe Lewis

Technorati Tags: silo spill silo overfilling silo overfill prevention fail safe level sensor self validating level sensor high level sensor level sensor extension

Dust can be a problem when adding Computer Hardware

Recently I flew to San Antonio to resolve an issue where an RS-485 Flexar unit absolutely would not communicate with a recently installed RS-485 PCI Bus adapter.  In this case, the computer recognized the card and drivers to be installed correctly because there were no errors reported when the hardware was examined in Control Panel of a PC running XP-Pro Service Pack 2.

After climbing the silo, examining all the wiring and soldered connections, verifying the sensor was functional at the process connection, I was ready to pull my hair out (It's OK, I have a lot for a man of my age).  I had taken my laptop and a USB RS-485 converter with me.  As soon as I plugged the customer's communicaion cable into my computer equipment, I had instant and reliable communications established. 

Since the above actions isolated the problem to the customer's PC, we took the covers off and moved the PC to a different slot. In doing so, I could feel the grit on the electronic connections as I pulled the board out. To make a long story short, I took a deep breath and blew what I could out of the PCI Bus connector on the pc, re-installed the RS-485 adapter, and upon power up established a successfull communication link between sensor and PC. Obviously, dust and dirt can be a good electrical insulator.

So, if you ever install computer hardware in a PC that has resided in a dusty/dirty environment for some time, I would consider taking the CPU outside and blowing it out with compressed air before performing the hardware installation. So, Concrete batch plants - take notice. :)

As a side note, there are industrial grade PC's on the market that are well sealed and cooling air is well filtered. They cost typically 4 to 5 times more then a generic pc at your local super store but may indeed be worth the price to you.  However, filters require periodic maintenance. Food for thought.

Greg DeRudder

Technorati Tags: silo spill silo overfilling silo overfill prevention fail safe level sensor self validating level sensor silo inventory management sensor computer systems 

Getting the Most out of that Expensive Service Visit.

Having a factory technician visit your facility for non-warranty service can be expensive.  After years of conducting field service visits, here are a few few tips I'd like to offer to help get the most from this expensive eventuality.  Yes, some of these tips may seem obvious but sometimes these things just have to be mentioned.

A)  Provide a listing of the equipment to be serviced.  OK, this tells us what parts may be needed - or if the equipment is even serviceable.  Providing no information leads to assumptions, the results which can be unpleasant.

B)  Provide a description of the problem experienced.  It'd be a shame to spend mucho molla only to hear that the problem is not a result of, or directly related to, the suspected piece of equipment being serviced.

C) Show up for work the day of the scheduled service visit.  No joke, it happens all too often that I have traveled to a job site to service a piece of equipment only to find that my site contact has taken the day off. The service activity will proceed but it's now up to the service tech to define the problem.

D)  Assign a responsible person to work with the technician.  Sort of related to item C above.  This facilitates communication and insures that the servicing proceeds at an efficient pace.  Often is is necessary for the tech to access other equipment and a company agent can provide direction and help mitigate any process disruptions.  Additionally, training/guidance as to the routine or periodic maintenance issues can be transfered which just might eliminate the need for future visits.

E)  Be available for a review-of-service briefing.  Hey, a bunch of money was just spent - don't you want to know how and why?  Also, a review of the work completed can insure the original problem was indeed remedied.

Andy Bowman

Technorati Tags: silo spill silo overfilling silo overfill prevention fail safe level sensor self validating level sensor instrument field service

Hello, Is This Thing On?

So, you show up at work and that expensive computer gadget or new process sensor isn't working.

Before diving deep into computer settings, network switches, set-up routines, etc... check the very basics; is it plugged in?  This most basic of troubleshooting steps will solve a surprising number of problems.  We once had a ultrasonic continuous level sesnor that was behaving erratically.  Sometimes it would be working fine and then all of a sudden stop working, then it would start again and so-on.  We discovered after a service visit that the power to the sensor was wired through a light switch!

But wait, the device is plugged in.  So what is the state of the electrical circuit to which the plug is connected.  Connection to an inadequate electrical service will stop the best design gadgets in their tracks.  Is the light switch turned on?  Ha Ha... true story (see note in previous paragraph). 

Check the power before proceeding with other troubleshooting.  Any electronic sensor which has been installed on a switchable circuit (recommended as a good practice) is certainly subject to this possible problem.  You may just find that this is surprisingly common.

Andy Bowman

Technorati Tags: silo spill silo overfilling silo overfill prevention fail safe level sensor self validating level sensor