TrueCap® Stub Probe Version
|
For instance, the stub probe model
(a shorter version of the standard probe) allows the TrueCap to be used
in tighter spaces, used to limit mechanical forces placed on the probe
from material flow or to keep the probe out of the main material stream.
In addition, the TrueCap design provides automatic immunity to material
build-up on the probe by its driven shield design. Options for
the TrueCap® stub probe model include a 3/4 inch / 1-1/4 inch
combination process connection for replacement or new installations and a
probe with white nylon insulator for food grade applications.
Outside View of Unloading Pit and TrueCap® Level Sensor
|
Inside View of Unloading Pit and TrueCap® Level Probe
|
The
photos above show a stub probe model of the TrueCap® installed in the
unloading pit of a grain handling elevator set-up. The TrueCap sends a
signal based on the system design requirements that involves the
unloading pit connected to a drag conveyor that feeds the bucket
elevator to move the grain to a silo. In this situation, the
TrueCap stub probe version was chosen because the shorter probe will
help to limit the amount of mechanical force on the probe from the
material (grain) flowing into the pit.
For more details on the selection of Monitor's TrueCap® RF Capacitance level sensors please visit http://www.monitortech.com/product_point.shtml#rf or e-mail: [email protected].
Comments